Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime!
Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're in Tampa, stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
|
|
| The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk! |
| hot tub inside storage area of basement |
Is it ok to put my hot tub in the basement back in my unfinished storage area. I have a good cover that goes over the tub. What are the pros and cons about putting a hot tub indoors? it will have exposure to the 1st floor floor joists and the backside of 2 basement walls/drywall. The rest is just concrete foundation. I have heard that putting them inside can cause problems. Was thinking if the cover was on the tub when not in use, it would not cause to many problems. Is it a bad idea??
Thanks
Bob |
| Posted by on 2006-10-12 23:02:09. (7318) |
|
The added humidity could be a problem to your surrounding structure, but I had a hot tub in my basement spare room for 2 years without any real affect. You could install a bathroom vent in the ceiling to help remove the added humidity. |
| Posted by on 2006-10-15 15:04:28. Albert Lea, MN (7357) |
|
I have a small 2 X 3-4ft window about 16 feet across the storage area. I wsa think that I could put a fan that would blow out that window and the maybe even a bath vent fan and run the duct line out to the window too. |
| Posted by on 2006-10-15 19:58:06. (7368) |
|
| | | The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk! |
Note: Prices and Specifications subject to change without notice
|
|

|
|
|
|
Related @ SpaForums | CalSpa Model 6300 control issue... Update... 11/30/08
I took off the sides to reach the controls and it became all too (more)...
| Air Valve Replacement Beachcomber Tub Hi, I need to replace the air valve on my 2002 beachcomber 530.
While looking inside (more)...
| 3 dots flashing and already replaced the pressure switch Hi,
We have a PDC Spa, actually at one of our rental cabins, and several months ago, (more)...
| 3 dots flashing and alreay replaced the pressure switch Hi,
We have a PDC Spa, actually at one of our rental cabins, and several months ago, (more)...
| Spa pumps turn on and off Yes, when you turn it on it says FLO and the 1 pump that I turned on it's light was (more)...
| Circulation pump wiring issues. I purchased an E5 circulation pump, and the wiring instructions given to me said that (more)...
| Where to buy CalSpa Motor? Techies-
I recently replaced a 6HP pump on a CalSpa, because it had been making a (more)...
| ASI Manhattan Spa Hope you can help,
I've just got the above spa, the heating light has been flashing (more)...
|
|
|
Are you in the Tampa Bay area? Visit Our Store! 14413 N Nebraska in Tampa Florida!
| Copyright © 1997-2008 Spa Babes, Inc. Tampa, FL Sales: 1-866-364-9681 Tech Support: 1-813-235-4574 |
|
|