We're Open!Wednesday Sales & Tech Help Available Now. 1-813-235-4574
Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! In Tampa? Stop by our store at 14413 North Nebraska Ave, Tampa, FL 33613! We have the spa parts, pumps and spa packs you need over the counter! Checks, Cash and Credit Cards Accepted! We Export World Wide! Canada, Mexico, Central/South America, Europe!
HOLIDAY SPECIAL
FREE SHIPPING ON ALL SPA PACKS AND FREE LED LIGHT WITH SPA PACK PURCHASE
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Topside plug retrofit
I have a 1991 Emerald Spa that has been refurbed with an AP1400 Spa Builder Supply complete pak. The topside control has a six pin standard plug but the controller does not have a plug. The case is marked for a "Topsides" plug but no plug installed. I have located the plug and was wondering if anyone knows if a plug can be installed and the topside controller used in a safe manner?
Posted by on 2004-12-03 00:08:06. Jacksonville, FL (1579)
If you can, open the spa control panel and take a couple of good digital pictures (and post them). Then I'll be able to tell you to connect what - where.
I could just go off of a schematic but since these things tend to change over time, it's safer having a photo of your specific control.
Posted by on 2004-12-14 23:23:05. Metro Atlanta, Georgia Region (1632)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
