We're Open!Wednesday Sales & Tech Help Available Now. 1-813-235-4574
Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! In Tampa? Stop by our store at 14413 North Nebraska Ave, Tampa, FL 33613! We have the spa parts, pumps and spa packs you need over the counter! Checks, Cash and Credit Cards Accepted! We Export World Wide! Canada, Mexico, Central/South America, Europe!
HOLIDAY SPECIAL
FREE SHIPPING ON ALL SPA PACKS AND FREE LED LIGHT WITH SPA PACK PURCHASE
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
attaching tubing
I need to replace water manifolds that cracked(freezing). I am going to replace 3/4" tubing (I.D.) which attaches to 3/4" barbs on manifold. The existing tubing was attached with a metal band that is crimped over the barb and tube, and there appears to be some adhesive. Tips on attaching tubing would be appreciated. eg;do you use a lubricant to slip the tubing onto the barb(it is very tight)? I saw waterway brand tubing clamps (appear to be plastic). Are these sufficient, etc. These are water supply tubes so under pressure. THANK YOU
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
