Friday Evening Sales & Tech Help Available Now! 5:45 Pacific, 4:45 AST, 2:45 PM HST, 1-813-235-4574 Unsure about your purchase? We're available to answer your questions now. Give us a call to help complete your order.If you're in the Tampa area, come see us at our store. We're located at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Checks, Cash and Credit Cards Accepted! We Export World Wide!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
rebuilding spa
We are rebuilding an 8 ft Octagonal fiberglass in-ground spa and need all the parts: 6 jets, 3 feedthrus for water in and out, ( cutout holes for these are 2 3/8" ). 1 floor drain 8" overall 6 1/4 cutout hole in fiberglass, skimmer 8 1/2 x 8 1/2 overall dims. cutout is 7" hi by 6 1/2 " wide. Light 6 1/2 " flange diameter, cutout is 5".
1 three way "ortega" valve for 1 1/2 " pipe. You can see pix of the existing spa and cutouts etc at :
http://picasaweb.google.com/rdoctors/RonsSpa
What oparts do i need to get to replace all of these with new ones?
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
