We're Open!Wednesday Sales & Tech Help Available Now. 1-813-235-4574
Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! In Tampa? Stop by our store at 14413 North Nebraska Ave, Tampa, FL 33613! We have the spa parts, pumps and spa packs you need over the counter! Checks, Cash and Credit Cards Accepted! We Export World Wide! Canada, Mexico, Central/South America, Europe!
HOLIDAY SPECIAL
FREE SHIPPING ON ALL SPA PACKS AND FREE LED LIGHT WITH SPA PACK PURCHASE
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
1991 CalX Ultimate w/ Hydroquip spa systems
:" title="Question" /> Appears this spa only wants to run during the week, for the past two weekends spa has been down. Spa was inherited, I converted it over to 220, then no heat, found problem and spa performed great during the week, when the weekend came the heater contractor blew apart, I replaced the contactor on Monday, spa ran great all week long, here comes the weekend. THe 6 prong control relay burnt up. The spa was running fine then I heard a pop and all power ceased due to GFCI trip. I reset the GFCI then I hearde a electrical buzz and now power. I was able to locate the problem the burnt relay. Not having a Skematic and very little troubleshooting infor on line. I am not able to locate the problem that caused the relay to burn out. I have located a relay by mail order, but when this new relay is installed will it burn also.
Please advise, of what the problem might be to cause the relay problem and what to check and eliminate so I can safely replace the relay without burning it up.
Thanks
Conky
Posted by on 2005-11-06 03:29:29. Northern California (4911)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
:" title="Question" /> Appears this spa only wants to run during the week, for the past two weekends spa has been down. Spa was inherited, I converted it over to 220, then no heat, found problem and spa performed great during the week, when the weekend came the heater contractor blew apart, I replaced the contactor on Monday, spa ran great all week long, here comes the weekend. THe 6 prong control relay burnt up. The spa was running fine then I heard a pop and all power ceased due to GFCI trip. I reset the GFCI then I hearde a electrical buzz and now power. I was able to locate the problem the burnt relay. Not having a Skematic and very little troubleshooting infor on line. I am not able to locate the problem that caused the relay to burn out. I have located a relay by mail order, but when this new relay is installed will it burn also.
Please advise, of what the problem might be to cause the relay problem and what to check and eliminate so I can safely replace the relay without burning it up.
Thanks
Conky 
