1999 Marquis Euphoria, no power to continuous, 1/2 power to the big pump on right.

I have two big pumps and 1 continuous.

I have a brand new heater and continuous pump installed (Laing)

The power doesn't kick in for the continuous. I disconnected the pressure switch wire and no power.

I hard-wired the end of the pressure switch wires together and connected other end to circuit panel and no power again.

Also, the right pump just started producing very little water flow, it might be the pump, the high/low seems to change the
sound of the pump quite a bit, just no water.

My main/primary concern is getting the continuous working, thank goodness it's not minus 20 here in Minnesota now!!

-Ron

Lakeville, MN 55044

Continuous pump = Circulation pump.

Have you checked all fuses on the control panel?

A Marquis Euphoria has one 30A fuse on the c-board, I've check the obvious stuff, is this a problem with a relay?

C-board has power, tub has power, circ/cont pump has no power as the c-board is not sending any.

Thanks,
-Ron

......................, is this a problem with a relay?
That would be my guess.