We're Open! Tuesday Evening Sales & Tech Help Available Now! 8:34 Pacific, 7:34 AST, 5:34 PM HST, 1-813-235-4574
Unsure about your purchase? We're available to answer your questions now. Give us a call to help complete your order.
If you're in the Tampa area, come see us at our store. We're located at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Checks, Cash and Credit Cards Accepted! We Export World Wide! |
|
| The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk! |
| HELP ME : chitty chitty bang bang _ hot tub on the FRITZ |
I just bought a house, it had a hot tub, everything has been tickity-boo.. however, today.. the guts (pump/motor) started making a louder.. clinky.. bad sound.. then the pump that circulates all the time.. so.. now when its on, it sounds like a bearing is shot or something.. what is the first thing I should do? Is there only one pump? or more then one.. and how much are they? help me if you can! Adam |
| Posted by on 2007-06-18 00:56:20. (10210) |
|
Your post is seriously lacking in information.
What brand?
What pumps do you have underneath?
How old is it?
Voltage Supply: 115 or 230?
If no ability to determine this, then post some photos of what you have under the hood. |
| Posted by on 2007-06-19 00:40:42. Metro Atlanta, Georgia Region (10226) |
|
ok here are some pictures, I didn't know what to take pictures of, so i Just went ahead and took a few.. the last picture is what is sitting underneath all of the guts.. it looks acidy or something, is this normal??
its a 1997 Shell Busey Signature series 'Concord' GPM: 85 Rating : 230 (don't know if this info means anything) it says 240V and 40AMP
and is this hose suppose to be 'off' like that???
thanks a bunch if you get this far in helping us!! |
| Posted by on 2007-06-19 13:39:09. (10241) |
|
| | | The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk! |
Note: Prices and Specifications subject to change without notice
|
|

|
|
|
|
Related @ SpaForums | CalSpa Model 6300 control issue... Update... 11/30/08
I took off the sides to reach the controls and it became all too (more)...
| Air Valve Replacement Beachcomber Tub Hi, I need to replace the air valve on my 2002 beachcomber 530.
While looking inside (more)...
| 3 dots flashing and already replaced the pressure switch Hi,
We have a PDC Spa, actually at one of our rental cabins, and several months ago, (more)...
| 3 dots flashing and alreay replaced the pressure switch Hi,
We have a PDC Spa, actually at one of our rental cabins, and several months ago, (more)...
| Spa pumps turn on and off Yes, when you turn it on it says FLO and the 1 pump that I turned on it's light was (more)...
| Circulation pump wiring issues. I purchased an E5 circulation pump, and the wiring instructions given to me said that (more)...
| Where to buy CalSpa Motor? Techies-
I recently replaced a 6HP pump on a CalSpa, because it had been making a (more)...
| ASI Manhattan Spa Hope you can help,
I've just got the above spa, the heating light has been flashing (more)...
|
|
|
Are you in the Tampa Bay area? Visit Our Store! 14413 N Nebraska in Tampa Florida!
| Copyright © 1997-2008 Spa Babes, Inc. Tampa, FL Sales: 1-866-364-9681 Tech Support: 1-813-235-4574 |
|
|