Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're in Tampa, stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Heating Problem with 1998 Watkins Tiger River Siberian
In my 1998 Tiger River Siberian the no-fault 6000 burned out. As I'm sure you know, they now replace the no-fault 6000 with a "Tri-Bend". I installed it and the water heats to 97 degrees and then the control head "ready indicator" light comes on and the heater stops heating. The heater is drawing 24 amps when it is on, so it seems to be working properly. The temp. lock is not on and the spa lock is also not on. I have also checked the thermisters and they both read 96-97 degrees. I called the Watkins tech people and they told me that I would need to replace the control head. It was easy to do and only set be back $250, but did not change anything. I'm guessing that I'm about to replace the IQ2000 control, right?
Posted by on 2005-10-30 00:46:00. Opelika, AL (4864)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
