Hi I am new here and i just bought a brand new gecko s class pack for my hot tub....however the problem lies in the fact that my hot tub only uses a 2 speed pump (low speed for circulation and high for jet action). I have no other stuff to plug in (no ozone /ect) so this should not be difficult to figure out. There is a series of 3 sets of pins that use jumper plugs and i have no listing on the inner panel for the pin configurations (one should be for HC / LC and one should control weather i have 2 speed pump or circ plus jet).I have the gecko topside control number 35 and my control works for the light and also for the heat up and down.....but when i press the jets button it goes into low speed and when i press it a second time it just turns off (not going into high speed) and the low speed does time out in 20 minutes.

What am i missing here...this should not be difficult...my old broken s class pack had the wiring (pin jumpers) listed on the innner cover and i used the same setting but could not for the life of me get the pack to make the two speed pump work correctly.When i received my new s class there were no pin jumpers installed.

Please help i really want to get my hot tub running again,

What model spa do you have..? D1 uses the S-Class pack in our @Home line and I could give you the information for that, if you would like.

Let me know.