My brother was given a spa and the person he bought it from disconnected the air switches. What I need to know is.... which wires go where?? He has 3 yellow, 3 black and 2 orange wires that aren't connected to anything. He said only 1 of the yellow ones is a live wire. So how would he connect it? ops:" title="Embarassed" /> Here is what I know: Hydro Quip product # HQ-1001E order code # CS 1001-A model # ROEQA2L-11004EO serial # 9811 184361 code # HYBOD-0321-005 120-240 VOLTS, 16-40 AMPS thanks so much Ashley

Hi!
Top switch in pack is the pump high and low switch,blk wire to bottom red wire to middle terminal and yellow and blk combination go to the top terminal this is an L shaped switch with the nipple being the top and sticking thru the cabinet and a plastic tube attached to it.Red is usually the low speed blk the high speed.
Blower switch is the next one down yellow on the bottom terminal violet on the middle an orange and yellow on the top.
The light switch has two orange wires on it top and bottom terminals middle is empty.
Pressure switch has a blk and a violet wire
combined attached to the bottom term. an a violet wire to the side terminal.
These are per a 1001 unit Hydro-quip I'll try and send you a print if I can.
Jim