Everything working trouble free and then one day no power to anything. There is power to the circut board and I have no problem with the electrical breakers. Its a older spa made by Saratoga with what seems to be Balboa parts. Can anyone tell me where to start to look for an answer to my trouble, or tell me what I need to be looking for as far as numbers for parts if they are needed. My first step is to try replacing the 20 ampere fuse, but after that I'm lost. Any help would be great!

Power to the board but nothing works could mean:

- Blown fuse
- Bad board
- Bad topside control
- Closed flow/pressure switch

Try turning the tub on with the flow/pressure switch wire disconnected.

The problem was the fuse. The reason the fuse failed I don't know. I unpluged everything before I replaced the old fuse. I pluged everything back in one at a time and tested after each. Small pump and heater first, them the main pump, blower, ozone and then the light. Everthing so far is working fine. Something blew the fuse but I was not able to find out what that may have been. But it's working again! " title="Very Happy" />

I have a saratoga spa with the same power failure - sounds like it might also be the fuse - Where is the fuse located?