We're Open! Tuesday Evening Sales & Tech Help Available Now! 8:19 Pacific, 7:19 AST, 5:19 PM HST, 1-813-235-4574
Unsure about your purchase? We're available to answer your questions now. Give us a call to help complete your order.
If you're in the Tampa area, come see us at our store. We're located at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Checks, Cash and Credit Cards Accepted! We Export World Wide! |
|
| The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk! |
| SUNDANCE TANGO 750 SENSORS?? STRANGE DISPLAY |
I am having issues with my Sundance Tango 750 (199 . The panel is reading "OH"(overheat) with a water temperature of 80F with the pump running. The display also reads 100, which is wrong. Sometimes I see a display of "----", and other times "ICE".
I can select the 'time' button, but cannot change the time. I can select the 'filter' button, but cannot change the filter times. All other button presses result in an immediate 'LOC' message.
These all imply to me that by board is misreading the sensors and/or is locked. The controls and sensors were all working perfectly last week.
I have checked my voltage, and it's a perfect 240v, with no blown fuses on the panel. All connections are confirmed solid. I have removed and replaced the sensor connector three times with the power off.
Can anyone suggest a testing procedure for my sensors or reset procedure for my board on this issue? Does it sound like something else?
Many thanks. |
| Posted by on 2008-04-29 10:25:26. (13450) |
|
| | | The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk! |
Note: Prices and Specifications subject to change without notice
|
|
|
|
|
|
Related @ SpaForums | CalSpa Model 6300 control issue...
Update... 11/30/08
I took off the sides to reach the controls and it became all too (more)...
| Air Valve Replacement Beachcomber Tub
Hi, I need to replace the air valve on my 2002 beachcomber 530.
While looking inside (more)...
| 3 dots flashing and already replaced the pressure switch
Hi,
We have a PDC Spa, actually at one of our rental cabins, and several months ago, (more)...
| 3 dots flashing and alreay replaced the pressure switch
Hi,
We have a PDC Spa, actually at one of our rental cabins, and several months ago, (more)...
| Spa pumps turn on and off
Yes, when you turn it on it says FLO and the 1 pump that I turned on it's light was (more)...
| Circulation pump wiring issues.
I purchased an E5 circulation pump, and the wiring instructions given to me said that (more)...
| Where to buy CalSpa Motor?
Techies-
I recently replaced a 6HP pump on a CalSpa, because it had been making a (more)...
| ASI Manhattan Spa
Hope you can help,
I've just got the above spa, the heating light has been flashing (more)...
|
|
|
Are you in the Tampa Bay area? Visit Our Store! 14413 N Nebraska in Tampa Florida!
| Copyright © 1997-2008 Spa Babes, Inc. Tampa, FL Sales: 1-866-364-9681 Tech Support: 1-813-235-4574 |
|
|
