Vita Spa L200 not powering up!

I just recently moved into a home w/ a Vita L200, It will not power on - Nothing on display and 12v lights on circuit board not lighting up. I tested the line voltage and tested at 245. Does not seem to be tripping the GFCI. To me it seems like it is a problem w/ the circuit board or the transformer. I found a site that had a svc manual for this model and it stated that the xformer was very reliable, but just wanted see if anyone has encountered same issue before. Any help will be greatly appreciated!

Posted by on 2006-11-05 23:23:00. (7867)

I would look to the transformer as a possible cause. You checked line voltage at the terminal strip inside the spa? If you can, back probe the connector for the transformer to see if you have power there. If so, I would strongly suspect the transformer.

Posted by on 2006-11-06 00:12:13. Albert Lea, MN (7870)

I tested the voltage to and from the transformer. there are 4 leads 2 blk to the 240 side and 2 blue to the 12v side..i have 120 on each blk lead and 6v on each blue lead.....is that normal?

Posted by on 2006-11-06 17:32:14. (7885)

measure between the wires, not wire to ground

Posted by on 2006-11-06 18:24:45. Albert Lea, MN (7889)

when i measure between the the incoming leads i'm not getting anyting

Posted by on 2006-11-07 06:24:02. (7909)