Hi new poster here, I also posted this under the Vita Spas rep post but thought i would check in this forum as it seems to be the corretc place.

I am about to pick up a used Vita Allure L700c. I didnt look when i went to view/buyto see where the electics enter the tub to hook up and cannot seem to find any reference in the online manual for the L700C at the Vita spas website. I am not able to look at the spa again until the weekend and in the meantime im trying to hook up electrics etc abd place the GFI within the distance of the tub but want to make sure its close enought to connect (in the position I plan on my patio)

Looking at the attached Overhead my GFI disconnect is currently planned to be at the TOP LEFT corner area of the Spa. So my question if looking at this picture is where will the cable need to enter when looking at this overhead so that i can estimate the Cable run from the GFI?

Edit* reading this again I really would like to know where within the spa is the board to connect the electrics and where ont he spa does the cable enter the inside panel.?

here is a picture i made " title="Very Happy" /> there is 2 ways you can come in with the wire.

Perfect thank you, I ran the wire in through the side cabinet (top Left).. Thanks again