Friday Sales & Tech Help Available Now. 1-813-235-4574 Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! In Tampa? Stop by our store at 14413 North Nebraska Ave, Tampa, FL 33613! We have the spa parts, pumps and spa packs you need over the counter! Checks, Cash and Credit Cards Accepted!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Voltage to pump when unit is off?
I have a Hydroquip 6000 series controller and the pump is not coming on. I show 124 volts on the pump receptacle when going from green to red, black and white wires when the switch on the unit is off. When I turn on the switch I no longer have 124 volts on the white wire? Also the white wire from the receptacle was plugged into a blue wire marked 240 volts that attaches to the relay(don't know if this is related?) I have a wiring schematic but it does not show where the white wire should be plugged into?
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
