Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're in Tampa, stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Wiring of 230 v motor
I have a BN40 220 volt single speed motor for a second pump. I am trying to wire a cord (J&J mini)that has four wires: green (ground) white (neutral) black and red (hot). My question is:
1) which two wires (excluding the ground) do I connect to the two terminals in the motor?
2) If one of them is the neutral wire (white), does it go to the terminal labelled L1? There is no terminal labelled "COM" or anything like that.
Posted by on 2008-04-27 16:04:40. (13417)
Re: Wiring of 230 v motor
Yes, the white wire is common, it goes to "L1." You'll need to figure out which wire is high speed, which wire is low speed, and wire them appropriately.
Posted by on 2008-04-27 16:46:19. SW Florida (13419)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
