Ok, here goes, water level was a little low after reseting gfi, i filled tub to full mark, weir gate at proper level, hit the up clean up button, no jet pump or hum but large red lite on panel comes on for 1 second and wall mounted gfi trips, during the 1 second on, i can here bubbles but thats it. I then pull the plugs(2) off control box coming from the heater, reset gfi and hit the clean up button. Nothing happens, period( light still on gfi). I put the plugs back into control box, reset gfi,hit clean up button, red lite on panel comes on for 1 second and trips gfi and here bubbles for 1 second. What up with that? ops:" title="Embarassed" />