Hi again, It seems my Hydro Quip 9000e is acting up. The timer is only controlling the high pump jets. I have tried reversing the red and black wires on the relay and still the timer only works the high pump. This is strange, because I thought if you reversed the red and black wires the timer would operate ther low or high, depending how you have them connected. I have the red (low pump) where it should be now and the black (high pump) where it should be, and no matter what, the timer only works the high jets.

I am confused, and really want it to work the way it should...the timer controlling the low jets.

Any ideas??? Thanks,

Ken

OK, did some brain storming, and found out why this was happening. For whatever reason, I had to switch the wires coming from the pump into my spa pack. I had a "plug in" receptacle on my spa pack....but no plug on my pump wiring. So, I snipped the wires off the plug in the pack, and wired my pump straight to them. I followed the colors, connected black with black, red with red, white with white, and green for ground. Well I don't know why, but when I wired the black pump wire to red pack wire, and vise versa, the timer now controls the LOW pump....not the high. Strange. I guess my pump may be miswired inside its casing. But I don't care to check it and find out.

Sweet!!!

Any idea how to get rid of the 20 minute jet timeout all together?