Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're in Tampa, stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Filter Bypass
On a filter bypass valve how much pressure should be on the spring? I have seen valves from 1/4 pound to as much as 5 pounds. Thank you!
Posted by on 2006-06-19 10:13:01. NY (6160)
You need to mention the brand/model of your filter, as well as horsepower of the pump and length/size of lines to/from the destination...
If you only have a few jets, then you may not need a bypass. Some filters will already have a bypass valve built in.
Posted by on 2006-06-19 13:57:27. Metro Atlanta, Georgia Region (6163)
The filter is a hayward C500 with a maximum capacity of 70GPM. The pump puts out about 120GPM. The filter is only 3 feet from the pump and the run to the tub is 20 feet. The plumbing is 2 inch. Thanks
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
