Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're in Tampa, stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Jacuzzi brand jet removal?
I have working what I believe to be Jacuzzi brand hot tub. We water tested it and it held water with the pump off. Cranked up the 3/4 hp pump and have a leak pump only runs for a minute and trips the breaker. I have a good 1hp waterway pump I'm going to plumb in and retest. Question # 1 how do you check remove the jacuzzi brand jet with the four slots in it. Is it a special tool? Can it be done from just the top side or must we dig out all of foam behind the jet? This tub was manufactured with the shell and skirt one single piece of fiberglass so we would have to turn the tub over. The foam must be a structural part of the tub as the shell material is pretty thin.
thanks
jen
Posted by on 2007-02-20 12:56:58. San Antonio, TX (9091)
My bad let me move post sorry
jen
Posted by on 2007-02-20 14:05:18. San Antonio, TX (9092)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
