Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're near Tampa, stop by our store at 17420 N US Hwy 41; in Lutz! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Moto Jet Low Flow
Newbie to the board. Replaced filters. Moto jet started strong then lost almost all flow. Main diverter valve is hard to turn under pressure. The owners manual says no reason to replace except hard to turn. Is there anything else that could block the flow? All other jets flow strong.
Posted by on 2009-06-13 22:36:10. (17266)
Re: Moto Jet Low Flow
On our D1 spa both my diverter valves are hard to turn under pressure and have been like that since new.
Posted by on 2009-06-20 00:15:26. Olympia, WA, USA (17347)
Re: Moto Jet Low Flow
You want to see if air is coming out of jet. If not it could be a broken airline - very easy fix.
Make sure the diverter lever is pointing left or right. Make sure the air control is open.
What model and year HotSpring spa do you have? A serial number is best.
Pete
http://www.makesmeshutter.comhttp://www.floridahotspring.com
Posted by on 2009-06-22 13:08:48. (17365)
Re: Moto Jet Low Flow
No air, Pete, and not very much water! It's a '96 jetsetter serial # JQ361021. Thanks for replying. Tom
Posted by on 2009-06-22 21:28:27. (17372)
Re: Moto Jet Low Flow
Lets see.
Pull the filters first. Again, make sure diverter valve is in correct position. Make sure air control is wide open.
Then I would remove the jet - pull off airline from nipple, see if broken. Unscrew jet by reaching in to where it is threaded. Inspect the hose inside the ribs and see if split. Hold the jet by the threads and let it hang - it should hang pretty straight - if it has a curve replace the jet.
Hope this helps
Pete
http://www.makesmeshutter.comhttp://www.floridahotspring.com
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
