Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're in Tampa, stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Rotating jet quit spinning
I have what I believe is a Sundance 1993 Maxxus 800 spa. It has some jets that are supposed to spin when the pumps are on, 1 or 2 of them stopped spinning by themselves. I know how to remove the jet mechanism and it has a rubber grommet at the base where it spins from. What is the maintenance procedure to make them spin freely again. I can spin them under water by hand and make the water pump at a different angle but they do not spin freely like they used to. Is there a lube that is supposed to be put on that grommet, or what. Thanks.
Posted by on 2006-08-05 13:31:36. (6511)
Often times what can happen is that the moving parts may become coated with calcium, inhibiting their movement. You can try to soak them in white vinegar for a couple hours to dissolve any calcium mineral build up.
Posted by on 2006-08-05 17:16:51. Albert Lea, MN (6517)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
