Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! In Tampa? Stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Trying to install a used Cal Spa
I picked up a 1993 8X8 Cal Spa VIP Special. I don't think it has run in at least a year, and I don't know it's history other than I got it free when my friend moved in to her house. I ran all my power lines and my GFCI box, got the tub hooked up. I filled it up with water also so I wouldn't run the pump dry. Now all I can get to work is the green light in the water.
I know it is going to need at least a heater element, the one in it is toast. I also know I have a few pipe leaks I need to fix, that shouldn't be to terribly hard. I have checked under the control box, and it is putting out plenty of power to the pump. Any suggestions on how to make it work? Test parts? Should I replace parts? I am completely new to hot tubs, but I work on things, and am a quick learner.
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
