Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're in Tampa, stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Wiring 2 speed 120v Pump
I have a 2 speed Franklin Electric spa pump model #4405007400 with a Line 1, High line and Low line and a white, black and red power, can you tell me which wire goes to which line. I have already attached the green to the to the screw. Also I have solid copper wire coming off the external off the outside of the motor case. Where would the best place to ground this line?
Thanks Matt
Posted by on 2006-08-08 23:36:38. FLA (6535)
The solid copper external bare wire should go to a terminal strip on the control panel box.
The red wire should go to the Low Line terminal
The black wire should go to the High Line terminal
The white wire will go to L1
This is all assuming that the motor is properly wired internally of course
Posted by on 2006-08-12 20:56:46. Albert Lea, MN (6579)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
