Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're near Tampa, stop by our store at 17420 N US Hwy 41; in Lutz! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
disconnecting impeller from motor
Can not Disassemble motor from wet end The seals were leaking on my (Hot Springs Jetsetter) Watkins Wavemaster 5000 1.5 Hp Jet Pump. So I bought new seals. I took apart the motor as far as I could, but I still can not disconnect my impeller from the pump. Anyone have the answer to this puzzle. I am sure it will be one of those "well of course" moments. Joe
Posted by on 2009-10-28 19:01:22. (18871)
Re: disconnecting impeller from motor
I use a pretty beefy pair of vise-grips on the part of the shaft that is exposed between the wet end and the motor. Then the impeller unscrews from the shaft.
If the seal has been leaking for a long time and there is a lot of corrosion then it may not come off without breaking.
Posted by on 2009-10-28 19:19:52. Eastern CT (18872)
Re: disconnecting impeller from motor
Be careful and try your best to get the impeller off - the manufacturer doesn't part out the impeller on the wave 5000. You might find one online though.
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
