Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're near Tampa, stop by our store at 17420 N US Hwy 41; in Lutz! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
2007 Spa Builders AP-4 Continuous Heating to 104
Symptom - Topside unit (Len Gordon 4 button 240v) heat setting will not go below 104 inconsistently. If I shut the breaker off and back on and set the temp to 90 the display changes back correctly to the thermometer reading. After 5 minutes the heat setting jumps back to 104. When I attempt to decrease the temp setting it won't allow me to go down any more then 103 or 102, then when after a few seconds it jumps back to 104. Note, this is the temperature setting, not the thermometer reading.
I tested control panel thermostat for continuity and contactors for play which all looks correct to me. I spoke with the spa builder and they agreed that is sounds like a faulty topside. I wanted to post here to see if there are other areas I can check to verify before I buy a $235 topside.
thanks in advance!
Posted by on 2009-02-02 12:03:02. (16018)
Re: 2007 Spa Builders AP-4 Continuous Heating to 104
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
