Control Unit Model: Hyro 600
Tub: 150 Gallon Omega

1. Cleaned tub this week. Drain and refilled.
2. Enjoyed tub last night and noticed it was probably overfilled. However, everything worked just fine.
3. Breaker tripped and also tripped house main a couple of times last night about 2 hours after we got out.
4. This morning I removed some water and ran the tub. We noticed the jets and air flow valve may not have been opened all the way.
5. Turned pump off using the top side air button.
6. Adjusted all the jets and air flow valve.
7. Turned on pump via air button.
8. Now Air Button will not turn pump off.
9. I removed the small air flow hose and removed a small amount of water and made sure I could feel air when the top side button was pushed.
10. Reconnected the hose but it still will not shut off the pump.
11. I currently have the pump unplugged from control unit.

Any ideas before I have to drain the tub this afternoon. We are in Montana and it freezes at night. Argh-

TIA

I have verified the air button switch replays are working but it still will not shut off the pump. I found no way to 'short it out' so I guess we will be turning the breaking on and off all night.....argh

All is well again.

I am having a similar problem, except that my pump won't turn on when I hit the button. I've disconnected the hose from the bottom of the controller and blew a little air in to it and it didn't turn on. Any help?