Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're in Tampa, stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
New Motor problem HELP!!!!!!!!
I just purchased a new motor and pump (2-hp 230V 2-speed)for my spa, and installed it. Both motor say Century Lasar pool/spa and both are (2-hp 230V 2-speed). I connected the new same as old
Green-ground
#2 term Line white
#3 term High) black
-----Line
#4 term Low) red
Problem: New motor comes on but trips breaker after a while and when I turn it on high, it turns off like an off switch. I reconnected my old motor and everthing works fine except for the bad bearing (the reason I replace the motor and pump in the first place)
Do I have a bad motor or a wiring problem?
Leo
Posted by on 2006-07-09 18:38:02. (6302)
Sorry, and this kinda stinks but it sounds like you got a bad motor. Be absolutely certain that your voltage/amperage ratings are somewhat close for both motors.
Posted by on 2006-07-10 02:53:54. Metro Atlanta, Georgia Region (6307)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
