Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! In Tampa? Stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Motor issues??Maybe
I have a hydro quip control box hooked up to a 230V motor. The box is wired for 110V. Is this an issue? The pump will run on low speed only. When checking the voltage I found approx. 115 from white to red, the same for white to black and no voltage between black and red. I have the wiring diagram and I verified that it is hooked up the 110 way. Should I switch the wiring over to 220?
Posted by on 2007-02-23 14:21:55. buxton nc (9152)
The lines for 220 are already ran to the breaker box with a GFCI so adding the extra input to the controller would be no problem.
Posted by on 2007-02-23 14:23:06. buxton nc (9153)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
