Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're near Tampa, stop by our store at 17420 N US Hwy 41; in Lutz! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Error Codes 188 and 24 on Brett Aqualine EM-190
I have a Brett Aqualine EM-190 with a Flo Master HP 2 speed pump. When I turn on the low speed pump, I get error code 188 (not in my manual), followed by code 24. I replaced the low flow switch (code 24), but still get the same message. The pump will evenually run on low speed, and then the system kicks off on high speed. Heater will also work once I get the pump going. I can hear a relay click when the 188 code resets. I had the heater element replaced about six years ago, so it's probably due for a new element. Does anyone have any ideas? I'm thinking either the pump or heater element. Thanks, Ranrod
Posted by on 2006-10-06 12:46:22. San Jose, CA (7256)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
