Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're near Tampa, stop by our store at 17420 N US Hwy 41; in Lutz! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk! This topic has attachments which you can't view here. To see this topic in its entirety,
Click Here
106 on Display and nothing else
I have a Winchester/ sundance SPA OWC3LXD-100105618034 that was overheating and threw code OH then --- and shut down. I fitted a new temp semsor and still was overheating. I fitted a new board as the relays were burned. Now all I have is 106 degrees showing on the display and the buttons do not operate. No heat no pumps. The fuses are all ok and power goes as far as the "Heater In" realy on the circuit board. Did I get a bad board or is something not activating the relay to the heater. I by passed the pressure switch and the high limit switches but no difference, just 106 on display and nothing else. What is setting the 106 degrees display as the water is now cold ?Anyone have an idea where to go now.
Posted by on 2009-10-04 13:14:28. (18526)
This topic has attachments which you can't view here. To see this topic in its entirety,
Click Here
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk! This topic has attachments which you can't view here. To see this topic in its entirety,
Click Here
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
