Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! In Tampa? Stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Dimension One Cove heat won't go over 86 deg.
I have a 2004 Cove that I bought used about two years ago. It has been running great since start-up, but about one week ago, the heat will not go above 86 deg. The display is reading correctly, and the heat light will come on and go off when heat is called for (at 86deg or lower only). Also, all the controls for the jets work properly and the program can be modified. The only obvious problem with the display is three lights blinking and the fact that I cannot raise the temp above 86. Any help or suggestions would be greatly appreciated.
The tub is running on a 120 volt circuit with GFCI and this has not been a problem since start-up.
Posted by on 2008-03-04 19:50:17. Upstate New York (12794)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
