We're Open!Wednesday Sales & Tech Help Available Now. 1-813-235-4574 Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! In Tampa? Stop by our store at 14413 North Nebraska Ave, Tampa, FL 33613! We have the spa parts, pumps and spa packs you need over the counter! Checks, Cash and Credit Cards Accepted! We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Problem with controls on spa, how to isolate issue
I have a LX-15 Spa Builder control system. My Display/Control panel has six buttons for control of a blower, 2 pumps and a light. The pumps, lights and blower will not operate off the displaly buttons, but the arrows do work. I dont know how to isolate down to which componet to replace. The display controller has a phone jack in.
Help.
Posted by on 2005-08-19 21:54:19. (3858)
It is most likely the topside control that is in need of replacement. They go through an intergrated circuit (chip) that translates it to use the 8 pin rj45 connector to go to the main board. Most likely you have a bad circuit trace in the topside. If it were me, I would replace the topside control first.
Posted by on 2005-08-22 01:17:18. Albert Lea, MN (3882)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
