Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're near Tampa, stop by our store at 17420 N US Hwy 41; in Lutz! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Replacing a control on a Marquis Spa
Hi. I have a Marquis Spa Coastal Series. Two of the control buttons no longer seem to work. They are both attached to "Control #1". Sometimes, if I rub my finger over one of the controls it will kick in. So I'm thinking the control button itself is no good. I found these parts online and they include a wire that goes all the way back to the main board, and includes and Rj45 on the wire.
So I get all that. I just want to know how I will install this new button. Do I cut the control off from the top (water side), or is that just a cover. Or, do I open it up from the side and replace the button from underneath, leaving the sealed top side?
Any help is appreciated. Knowing this information, I'll buy the parts and put them in!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
