Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're near Tampa, stop by our store at 17420 N US Hwy 41; in Lutz! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Sundace spa, sentry 604 with low heat temp
I have an 1987 sudance spa with a sentry 604 control system. The spa began to overheat and trip the overheat sensor. I replaced the temp sensor. This solved the problem but a new problem occurred. The water temperature does not get hot enough now. It will heat to the high 90s, maybe 100 degrees. The thermostat knob is as far on hot as it will go. It worked fine before the overheat issue and the replacement of the temp sensor. Anyone have any ideas? Thanks R.T. rljatrout@nethere.com Note:system is all electric set up for 220v.
Posted by on 2009-02-14 14:01:37. (16219)
Re: Sundace spa, sentry 604 with low heat temp
Just to be sure, double check your water temp with a meat thermometer. If it was overheating before you might be used to >104 degree water.
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
