Hey every one, just want to say how much good info there is out here!

Here is my problem: Blew a Balboa pack, it fried pretty good, only reason I can find is a loose connection to power. Replaced my wiring, my ground fault breaker, and installed new pack. Rewired for the new connectors. It has been working just fine now for about a year.

However, since this replace, when I plug in the topside (which is DID NOT replace) I get the back light, and every single element on the LCD is on (displays 1.8.8.8 Hi/lo). The light switch throws a relay that I can hear, but does not turn on the light, while the temp button turns on the pump! Because of this, I have not left the topside pulgged in, worried it will blow something in the board.

I have two questions: Does anyone know if there is a jumper on the M7 LE2000 for standard or deluxe topside? (mine is standard, as simple as it gets) I'm thinking the board might be set to deluxe, hense the weirdness.

Secondly, do you know if the M7 LE2000 will even take a deluxe controller if I have to replace my existing topside?

Ideally, I would love to find a detailed schematic for the M7 LE2000 that would show me what all the jumpers do. The schematic on the back of the cover only shows wiring for pumps, lights, ozone, and such, without any information on jumpers.

Any help would be welcome!!