|
| The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk! |
| Dimension One Tripping GFI |
I bought a used D1 Luxxor Platinum Spa. The people I bought it from did not have it hooked up through a GFI. After bringing it home and hooking it up through a GFCI it keeps popping the breaker. Unhooking the ozonator stopped the breaker from tripping but now I am getting a FLO1 error. I assume that is because the ozonator is unhooked. What are my options from here? Can I bypass the ozonator? |
| Posted by on 2008-10-12 21:12:52. (14795) |
|
Re: Dimension One Tripping GFI
If you are sure it is your ozonator then replace it with a new one. |
| Posted by on 2008-10-13 15:25:58. (14797) |
|
Re: Dimension One Tripping GFI
Now I am not sure that it is the ozonator. If you unplug the air pump everything runs but the second you reconnect the air pump the GFI immediately trips. Took the air pump to a shop and they tested it and said it was OK. |
| Posted by on 2008-10-13 23:47:55. (14804) |
|
| | | The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk! |
Note: Prices and Specifications subject to change without notice
|
|
|
|
|
|
Related @ SpaForums | CalSpa Model 6300 control issue...
Update... 11/30/08
I took off the sides to reach the controls and it became all too (more)...
| balboa vs501z error code HH
The model is a VS501Z; date on inside wiring diagram is 06/12/07, Part # 54356HC1
Hooked (more)...
| Air Valve Replacement Beachcomber Tub
Hi, I need to replace the air valve on my 2002 beachcomber 530.
While looking inside (more)...
| 3 dots flashing and already replaced the pressure switch
Hi,
We have a PDC Spa, actually at one of our rental cabins, and several months ago, (more)...
| 3 dots flashing and alreay replaced the pressure switch
Hi,
We have a PDC Spa, actually at one of our rental cabins, and several months ago, (more)...
| Gatsby circulation pump will not stay running
Hi, new to hot tubs but after reading many posts I think I may need to replace the (more)...
| Spa pumps turn on and off
Yes, when you turn it on it says FLO and the 1 pump that I turned on it's light was (more)...
| Circulation pump wiring issues.
I purchased an E5 circulation pump, and the wiring instructions given to me said that (more)...
|
|
|
| Copyright © 1997-2008 Spa Babes, Inc. Tampa, FL Sales: 1-866-364-9681 Tech Support: 1-813-235-4574 |
|
