Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're in Tampa, stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
no power CalSpa PS3
I bought a used unit which was running at the time. I have run the 220V from the main electrical box to a GFCI unit outside(attached to house) and ran the wire to the hot tub. Upon hooking up the wires to the hot tub I ran into a problem. The white wire from the 1st juntion/bridge when hooked up will trip the breaker. I can not see where there is a mistake in the 220V coming to the hot tub. If I wire the hot without the white wire, I do get 220V to the far side of the bridge. But that is as far as it will go. Any ideas??
Posted by on 2005-09-10 16:35:45. (4162)
Update to prior post
I did find out that the white(nutural wire) in the GFCI was wired wrong. But after correcting that problem I still get no power!. I turn on the on/off switch on the hot tub and nothing happens.
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
