Ok, Im new here so go easy on me. We just purchased a new home that came with a hot tub. Its a Blue Pacific Spa with a 3A Control Center. One of the first things I did was have the Spa serviced. The guy did a fantastic job, sold me a Ozone Generator and replaced some jets. I was thoroughly impressed and happy with what was done. It has been used several times since we moved in and everything seems to be going great,,,,,,,until today. I went out to turn up the temperature when I realized the "air" jets werent on. I opened the cover and pressed the "air" button.......nothing but a click. I pressed the "jets" button......nothing but a click. I even tried turning on the light and nothing. The breaker wasnt tripped and the light to the ozone generator is off. I unplugged all the jacks going to the Control Center and plugged them back in. When I got to the motor plug it looks like one of the plug wires is burnt out. Its a 1.5 HP motor. Not sure if I should start with the motor, or have the Control Center looked at. Weird, all was well up until today. Any help would be greatly appreciated.