Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're in Tampa, stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
On/Off switch on hot tub
I have a United Spas Hot Tub Model 5060EGAC-1 which runs the motor and circulates the water on the timing cycle but will not start when I push the on/off switch. I can manually turn the motor on and have the low intensity jets running, but not the high. I traced the hose which runs under the on/off button and it goes to the control panel to what looks like a solenoid (round plug looking gizmo with two black+one red wire). Not sure what you call that. I'm wondering if that is what the problem is or something else. Any recommendations or advice would be helpful. Thanks.
Posted by on 2006-06-07 19:46:42. California (6060)
maybe you can contact your manufacturer. you can call them on
United Spas Manufacturing -1-800-682-2772
or visit http://www.unitedspamfg.com/contact.htm
I know they are the one who can help you with your problem.
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
