Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're in Tampa, stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Problems with thermostat for a heat exchanger
I have an older ( 1992 ) "Ocean Mirage" hot tub and I have had it from day one. It uses a heat exchanger to heat the water. Not much for controls on this one. It has three air switches and two control knobs. One air switch for the lights; one for the two speed motor and one for the blower. The control knobs control the air to the jets and shuts the water fall on and of.
This tub has a thermostat control on the under side. It has a probe that goes into one of the circulating water pipes and is connected to the control via a small copper tubing. I'm assuming it is like a thermo coupler. I have had to replace this control numerous times during the life of the tub; and I have to do that again now. I was wondering if there is a stand alone digital thermostat that could replace this one. I browsed your inventory in your store and couldn't find anything.
Thanks in advance
Posted by on 2007-11-19 08:58:22. Calgary; Alberta; Canada (11597)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
