|
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
This topic has attachments which you can't view here. To see this topic in its entirety,
Click Here |
| Proper volatge? |
1988 Sundance Cameo
230 v circuit
Balboa 605 series
Analog thermostat, electric switches.
Jet Pumps (230V), one is 2 Speed, other is single speed
2 1/2" Stainless Flow Thru, 15" long
Here is something strange: My tub is wired for 230 but is only drawing 115. I have the tub running on full speed with the heater and it only shows 115 on the tub side of my GFCI and 230 on the supply side. I took the GFCI out(just for testing) and now the 115 goes all the way back to the junction box in my house again with 230 on the supply side.
Is this normal? Should my heater be running at 115 or 230? It tests out at 115 on both side of the terminals when the heater should be on.
Tim |
| Posted by on 2005-11-20 11:48:56. (5210) |
|
| This topic has attachments which you can't view here. To see this topic in its entirety,
Click Here | | | The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
This topic has attachments which you can't view here. To see this topic in its entirety,
Click Here |
Note: Prices and Specifications subject to change without notice
|
|
|
| Copyright © 1997-2008 Spa Babes, Inc. Tampa, FL Sales: 1-866-364-9681 Tech Support: 1-813-235-4574 |
|
