Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're near Tampa, stop by our store at 17420 N US Hwy 41; in Lutz! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
HotSprings Leaking at air/water adjuster
I have an older Hotsprings 3 seat hot tub that is leaking at the air intake controller on top of the tub. In order to fix this do I pull all the insulation out and repair from underneath or is there a way to replace the controller from the top? Also are there any chemicals that will loosen the PVC glue at the joints? Or do I just replace the entire PVC connection and make a coupling connection. Any suggestion would be greatly appreciated.
Posted by on 2009-08-24 17:02:14. (18117)
Re: HotSprings Leaking at air/water adjuster
A serial number or model and year would help a lot.
It shouldn't leak at the air control - are you sure it's not the diverter valve?
If you can cut and sleeve the plumbing that is the better way to go. I cut the hose leaving a little and try to turn it with pliers. If that doesn't work I slit the inside of the hose with a dremel tool and then try to pull it out. But the best is to replace if it's not too hard.
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
