Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're near Tampa, stop by our store at 17420 N US Hwy 41; in Lutz! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
hot springs sovereign 1990 jets do not work
Hi,
Last week I drained and cleaned our spa, after refilling it I turned the heat on and tested the jets and everything worked fine. A few days later I take the cover off and the water is up to temperature but the jets do not work. When I press the button I hear a click but nothing happens. I checked the GFCI and reset the breakers on the control panel inside the tub and nothing happens. Any suggestions?
1990 sovereign 220V
Posted by on 2009-04-25 12:32:29. (16759)
Re: hot springs sovereign 1990 jets do not work
There should be two reset buttons on the side of the main control box...try pushing both of them in.
Also, check to see if there is a problem with the impellar being corroded and expanded. Look at where the electrical motor connects to the front of the pump. Sometimes the seal assembly leaks and causes the impellar to expand and bind up.
Posted by on 2009-04-26 07:42:28. Eastern CT (16764)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
