Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're near Tampa, stop by our store at 17420 N US Hwy 41; in Lutz! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Balboa pumps on KeysBackyard SPA - getting DRY code HELP!!!
I filled my hot tub the other day after draining it for the winter. I did everything I was supposed to do. Filled it up, bled the air out of the pipe lines, and then primed it.
AND IT WORKED - I was a happy camper
I came back the next day to check the chemicals and balance the ph out, and the spa was on, but not pumping.
NEITHER of my 2 pumps would work. In the LED panel I got the word DRY as an error code.
Now the tub is full to the proper line, but neither pump will turn on. I have talked to someone who said the sensores on the Balboa system might be shot. IT appears that all fuses are OK. the three I can see are fine but I can't tell if the 30 amp fuse is ok because of all the mesh doodoo in the fuse.
Can anyone help.
I use the SPA for my wife's bad back and, even though I can't afford the electricity this year - I need to keep her moving. This is very important.
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
