Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're in Tampa, stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Balboa 27100 - Only heating to 90 and then cycling heater on and off
I have an old Discovery Spa with a Balboa 27100 circuit board and an analog control. Everything works well until it heats to a certain point and starts cycling the pump and heater on and off. First the pump starts then the heater comes on for a second and goes off. Then the pump stops(over and over). The thermostat seems to work, because I can control how hot it will get before it starts cycling. Also, it will only heat to 90 degrees when temp is set to the max. If I run the pump in fast mode, the heater cycles on and off in the same manner.
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
