Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! In Tampa? Stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Balboa 2CEM73 M7 Overheating Problem
I have one of these boys fitted in my tub and noticed it had started to overheat. Sensor wise I have two 24" Balboa sensors that go into the heater element - one near the element entry point and the other up the other end of the tube. I have tried swapping these over on short term and am warming up now to test. The other strange thing is that the cuirculation pump seems to stay on for most of the time whereas I think that we used to be able to turn it off previously - i.e: the switch for that pump could be described as 3-position where now it seems to be only two position. Could anyone with more knowledge of these boards explain a little as to exactly how they function? Regards Chris
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
