Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! Concerned about the economy? Fix your spa now, most people don't need to buy a new tub! (Save Money $$$) If you're in Tampa, stop by our store at 14413 North Nebraska Ave! We have the spa parts, pumps and spa packs you need over the counter! Monday thru Friday 9-5, Saturday 9-3 We Export World Wide! Canada, Mexico, Central/South America, Europe!
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Sundance Camio wont heat
Ive replaced the flow switch and the heater, but the spa still wont heat. It's a 220v and I'm reading 120 on both teminal studs of the heater. There is water coming out of the heater jet, but feels cold. The first time I filled it it heated at a rate of 4 deg. an hour. Now I left it on for an hour and nothing. This spa has no reset button for hi current switch. The heater is 00.00 for resistens on the studs to the case, and the same from stud to stud. Whats next?
Posted by on 2005-09-24 22:39:40. (4318)
In order to properly check a heater for voltage you need to check BETWEEN the two terminal studs going to it, on a 220V heater you will ALWAYS read 110V from each terminal to ground, but if you read 220V between the two leads then no matter what it is a bad heater. If you are however reading 0 between the two leads then if could be a flow problem or a circuit board gone bad...Ohms resistance between the two heater studs should read between 9-12 but in order to check this properly you have to disconnect BOTH wires going to the heater.
Posted by on 2005-09-29 12:37:37. Tampa, Fl (4382)
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
