We're Open!Thursday Sales & Tech Help Available Now. 1-813-235-4574
Spa and Hot Tub Tech Support and Parts Sales Help is often available evenings & weekends if you can't get through in the daytime! In Tampa? Stop by our store at 14413 North Nebraska Ave, Tampa, FL 33613! We have the spa parts, pumps and spa packs you need over the counter! Checks, Cash and Credit Cards Accepted! We Export World Wide! Canada, Mexico, Central/South America, Europe!
OUR HOLIDAY GIFT TO YOU
FREE SHIPPING ON ALL SPA PACKS AND FREE LED LIGHT WITH SPA PACK PURCHASE
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
lukewarm in old D1/Balboa spa
My spa is a Dimension One Interlude SL(1995) with a Balboa circuit board #27100 and a Balboa analog spa side control (51221) with 3 buttons and thermostat knob and 1 led heat/status light. I recently refilled and am getting error code of 1 flash. Replaced and recalibrated pressure switch and pulled filter with no luck. Water flow thru lo flow heater seems same as when new. Heat indicator goes to steady on when heater relay closes. If this helps...when heater relay is closed, the RL4 Hi Limit and RL3 Hi Limit relays are also closed. When heater relay is open (heater off), RL3 and RL4 Hi Limit relays are also open. Could this be a spa side control problem and how could I diagnose this? Should I get an ammeter and test current draw from heater?
The information contained in this forum is from SpaForums.Com
and IS NOT AUTHORITATIVE advice or official commentary from SpaPartsNet or SpaBabes Incorporated. Use this information at your own risk!
Note: Prices and Specifications subject to change without notice
No representations or warranties are made as to the accuracy or completeness of the information contained in this website. Check with a competent professional in your area for assistance.
