©2008 Mizu Ent. Inc.
Sales 866-364-9681 · Tech Support 813-235-4574 ·
SpaPartsNet.com
BALBOA
EQUIPMENT SYSTEMS
Balboa Bundled Skid Packs (No Blower)
VS501Z Retrofit "SKID" Kit
PN 54211-z
Includes:
· VS501Z System 120/240V
- 5.5KW STAINLESS STEEL FLOW-THRU HEATER W/M-7 TECHNOLOGY,
no pressure switch needed
- 1.0 HP, 120V, 2 speed pump
- 21086 cord for ozone, 120/240V
- 21086 cord for blower, 120/240V
- 21089 harness for spa light, 12V/12W
· 51676 Lite Duplex top side (1 pump, light, blower)
· 10752 Overlay (pump 1, pump 2, light)
· 11109 Retrofit top side adapter
VS510SZ Retrofit "SKID" Kit
PN 54213-z
Includes:
· VS501SZ System 120/240V
- 5.5KW STAINLESS STEEL FLOW-THRU HEATER W/M-7 TECHNOLOGY,
no pressure switch needed
- 1.5 HP, 240V, 2 speed pump
- 21086 cord for ozone, 120/240V
- 21086 cord for blower, 120/240V
- 21089 harness for spa light, 12V/12W
· 53189-01 Serial Standard top side (2 pump, light, blower)
· 10402 Overlay (2 pump, light, no blower)
· 10165 Retrofit top side adapter
VS501SZ Retrofit "SKID" Kit
PN 54212-z
Includes:
· VS501SZ System 120/240V
- 5.5KW STAINLESS STEEL FLOW-THRU HEATER W/M-7 TECHNOLOGY,
no pressure switch needed
- 1.5 HP, 240V, 2 speed pump
- 21086 cord for ozone, 120/240V
- 21086 cord for blower, 120/240V
- 21089 harness for spa light, 12V/12W
· 51057-01 Serial Standard top side (1 pump, light, blower)
· 10402 Overlay (2 pump, light, no blower)
· 10165 Retrofit top side adapter
VS510SZ Retrofit "SKID" Kit
PN 54215-z
Includes:
· VS510SZ System 120/240V
- 5.5KW STAINLESS STEEL FLOW-THRU HEATER W/M-7 TECHNOLOGY,
no pressure switch needed
- 2.0 HP, 240V, 2 speed pump
- 21086 cord for ozone, 120/240V
- 21086 cord for blower, 120/240V
- 21089 harness for spa light, 12V/12W
· 53189-01 Serial Standard top side (2 pump, light, blower)
· 10402 Overlay (2 pump, light, no blower)
· 10165 Retrofit top side adapter
VS501SZ Retrofit "SKID" Kit
PN 54214-z
Includes:
· VS501SZ System 120/240V
- 5.5KW STAINLESS STEEL FLOW-THRU HEATER W/M-7 TECHNOLOGY,
no pressure switch needed
- 2.0 HP, 240V, 2 speed pump
- 21086 cord for ozone, 120/240V
- 21086 cord for blower, 120/240V
- 21089 harness for spa light, 12V/12W
· 51057-01 Serial Standard top side (1 pump, light, blower)
· 10402 Overlay (2 pump, light, no blower)
· 10165 Retrofit top side adapter
"When installing a new
heater or control head
I install a PVC 'T' just
past the heater with a
water spigot installed
facing up. After the tub
is full you can use the
spigot to bleed the air
out of the heater cham
-
ber." Gene T. WV
